Cisco ASR 5x00 Administration Manual page 168

▀ Configuring the System as a Standalone PMIP P-GW Supporting an eHRPD Network
context <pgw_context_name> -noconfirm
apn <name>
accounting-mode radius-diameter
associate accounting-policy <rf_policy_name>
ims-auth-service <gx_ims_service_name>
aaa group <rf-radius_group_name>
dns primary <ipv4_address>
dns secondary <ipv4_address>
ip access-group <name> in
ip access-group <name> out
mediation-device context-name <pgw_context_name>
ip context-name <pdn_context_name>
ipv6 access-group <name> in
ipv6 access-group <name> out
active-charging rulebase <name>
Notes:
 The IMS Authorization Service is created and configured in the AAA context.
 Multiple APNs can be configured to support different domain names.
 The associate accounting-policy command is used to associate a pre-configured accounting policy with this
APN. Accounting policies are configured in the P-GW context. An example is located in the
Configuring a P-MIP P-GW Context
Creating and Configuring AAA Groups in the P-GW Context
Use the following example to create and configure AAA groups supporting RADIUS and Rf accounting:
configure
context <pgw_context_name> -noconfirm
aaa group <rf-radius_group_name>
radius attribute nas-identifier <id>
radius accounting interim interval <seconds>
radius dictionary <name>
radius mediation-device accounting server <address> key <key>
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
168
section above.
PDN Gateway Configuration
Creating and