Introduction - Cisco ASR 5x00 Administration Manual

▀ Introduction

Introduction
The Gy interface is the online charging interface between the PCEF/GW (Charging Trigger Function (CTF)) and the
Online Charging System (Charging-Data-Function (CDF)).
The Gy interface makes use of the Active Charging Service (ACS) / Enhanced Charging Service (ECS) for real-time
content-based charging of data services. It is based on the 3GPP standards and relies on quota allocation. The Online
Charging System (OCS) is the Diameter Credit Control server, which provides the online charging data to the
PCEF/GW. With Gy, customer traffic can be gated and billed in an online or prepaid style. Both time- and volume-
based charging models are supported. In these models differentiated rates can be applied to different services based on
ECS shallow- or deep-packet inspection.
In the simplest possible installation, the system will exchange Gy Diameter messages over Diameter TCP links between
itself and one prepay server. For a more robust installation, multiple servers would be used. These servers may
optionally share or mirror a single quota database so as to support Gy session failover from one server to the other. For a
more scalable installation, a layer of proxies or other Diameter agents can be introduced to provide features such as
multi-path message routing or message and session redirection features.
The following figure shows the Gy reference point in the policy and charging architecture.
Figure 32.
The following figure shows the Gy interface between CTF/Gateway/PCEF/Client running ECS and OCS (CDF/Server).
Within the PCEF/GW, the Gy protocol functionality is handled in the DCCA module (at the ECS).
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
338
PCC Logical Architecture
Gy Interface Support