Cisco ASR 5x00 Administration Manual page 169

PDN Gateway Configuration
diameter authentication dictionary <name>
diameter accounting dictionary <name>
diameter authentication endpoint <s6b_cfg_name>
diameter accounting endpoint <rf_cfg_name>
diameter authentication server <s6b_cfg_name> priority <num>
diameter accounting server <rf_cfg_name> priority <num>
exit
aaa group default
radius attribute nas-ip-address address <ipv4_address>
radius accounting interim interval <seconds>
diameter authentication dictionary <name>
diameter accounting dictionary <name>
diameter authentication endpoint <s6b_cfg_name>
diameter accounting endpoint <rf_cfg_name>
diameter authentication server <s6b_cfg_name> priority <num>
diameter accounting server <rf_cfg_name> priority <num>
Creating and Configuring an LMA Service
Use the following configuration example to create the LMA service:
configure
context <pgw_context_name>
lma-service <lma_service_name> -noconfirm
no aaa accounting
revocation enable
bind address <s2a_ipv6_address>
end
Notes:
 The
no aaa acounting
 Enabling revocation provides for MIP registration revocation in the event that MIP revocation is negotiated with
a MAG and a MIP binding is terminated, the LMA can send a revocation message to the MAG.
Configuring the System as a Standalone PMIP P-GW Supporting an eHRPD Network ▀
command is used to prevent duplicate accounting packets.
Cisco ASR 5x00 Packet Data Network Gateway Administration Guide ▄
169