Cisco ASR 5x00 Administration Manual page 119

PDN Gateway Configuration
radius mediation-device accounting server <address> key <key>
diameter authentication dictionary <name>
diameter accounting dictionary <name>
diameter accounting endpoint <rf_cfg_name>
diameter accounting server <rf_cfg_name> priority <num>
exit
aaa group default
radius attribute nas-ip-address address <ipv4_address>
radius accounting interim interval <seconds>
diameter authentication dictionary <name>
diameter accounting dictionary <name>
diameter accounting endpoint <rf_cfg_name>
diameter accounting server <rf_cfg_name> priority <num>
Creating and Configuring an eGTP Service
Use the following configuration example to create the eGTP service:
configure
context <pgw_context_name>
egtp-service <egtp_service_name> -noconfirm
interface-type interface-pgw-ingress
validation mode default
associate gtpu-service <gtpu_service_name>
gtpc bind address <s5s8_interface_address>
end
Notes:
 Co-locating a P-GW service on the same ASR 5x00 requires that the
same IP address the P-GW service is bound to.
Creating and Configuring a GTP-U Service
Use the following configuration example to create the GTP-U service:
configure
Configuring the System as a Standalone eGTP P-GW ▀
gtpc bind address
Cisco ASR 5x00 Packet Data Network Gateway Administration Guide ▄
command uses the
119