Configuring Hsgw Rf Interface Support - Cisco ASR 5x00 Administration Manual

▀ Configuring Rf Interface Support
ACR Message Change-
Condition
Value
Interim -

Configuring HSGW Rf Interface Support

To configure HSGW Rf interface support, use the following configuration:
configure
context <context_name>
hsgw-service<service_name>
associate accounting-policy <policy_name>
exit
exit
policy accounting <policy_name>
accounting-event-trigger { cgi-sai-change | ecgi-change | flow-information-change |
interim-timeout | location-change | rai-change | tai-change } action { interim | stop-
start }
accounting-keys qci
accounting-level { flow | pdn | pdn-qci | qci | sdf | subscriber }
cc profile index { buckets num | interval seconds | sdf-interval seconds | sdf-
volume { downlink octets { uplink octets } | total octets | uplink octets { downlink
octets } }
| volume { downlink octets { uplink octets } | total octets | uplink octets { downlink
octets } } }
max-containers { containers | fill-buffer }
exit
end
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
482
CCF Response to Change-
Condition Value
Addition Partial
of FDR
Container
YES NO
| serving-nodes num | tariff time1 min hrs [ time2 min hrs...time4 min hrs ]
CC Level Population
Final FDR PS-Information
Level
NO N/A N/A
Rf Interface Support
Comments
SDC Level
This is included here to
indicate that an
ACR[Interim] due to AII
timer will contain one or
more populated SDC/s for
a/all flow/s, but Change-
Condition AVP will NOT
be populated.