HP Designjet 350C User Manual page 37

5
Follow the instructions on the
Setup Sheet. Having marked the
ovals to change the settings, reload
the sheet in the plotter, printed side
down, with the large arrow pointing
into the plotter
When the light comes on,
Ready
press again.
Setup
The plotter reads your marks and
reconfigures itself automatically.
When the Load Media
6
again, remove the sheet and make sure
that the plotter has marked your
selection with a check mark.
7 Please store this latest copy of the Setup Sheet with the Quick Reference Guide in
the plastic pocket at the side of the plotter, so that a service engineer would know
the current configuration even if the plotter is inoperable.
Task 8 (optional): Configure the plotter
Setup
light comes on
1751b
Setting up your plotter
Ready
Load Media
1–23