Regulatory Notices - HP Designjet 350C User Manual

Reference

Regulatory notices

Regulatory notices

To obtain a Material Safety Data Sheet (MSDS)
You can obtain current Material Safety Data Sheets for the print cartridges used in
the plotter (HP Part numbers 51644C [cyan], 51644M [magenta], 51644Y [yellow]
and 51640A [black]) by mailing a request to this address:
Hewlett-Packard Customer Information Center, 19310 Pruneridge Avenue,
Dept. MSDS, Cupertino, CA 95014, U.S.A.
Electromagnetic compatibility (EMC)
FCC Statement
The U.S. Federal Communications Commission (in 47 cfr 15.105) has specified
(USA)
that the following notice be brought to the attention of users of this product:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try and correct the
interferences by one or more of the following measures:
The user may find useful the following booklet prepared by the FCC: "How to
Identify and Resolve Radio TV Interference Problems." This booklet is available
from the US Government Printing Office, Washington, DC 20402. Stock No.
004 000 00345 4.
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this
C A U T I O N
equipment, not expressly approved by Hewlett-Packard Company, may cause
harmful interference and void the FCC authorization to operate this equipment.
10–12
Reorient the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
Consult the dealer or an experienced radio/TV technician for help