HP Designjet 350C User Manual page 96

Special internal plots
Using the Black Cartridge Alignment Sheet
2
When you have correctly loaded the sheet
(when the light is on and steady),
Ready
press the and
Setup
simultaneously.
The Black Cartridge Alignment Sheet is
printed. An example is shown on
page 5–5.
3 When the
Load Media
remove the sheet from the plotter.
4 Follow the instructions on the sheet itself. As you will see, this involves you
identifying the straightest set of vertical lines in each of the two boxes.
5 If the straightest sets are already the current selection, you need do nothing more.
If not, then mark the appropriate ovals, reverse the sheet as indicated, and reload it.
6
When the Ready light comes on, press
.
Setup
The plotter now reads your marks and
adjusts itself automatically.
5–4
keys
Replot
light comes on (not flashing), the plot is finished. Simply
Setup + Replot
Setup
Ready