HP Designjet 350C User Manual page 25

Don't touch the stainless steel strip that runs the length of the plotter behind
W A R N I N G
the cartridge carriage; its edge is very sharp. Keep hair, jewelry, clothing, and
foreign objects away from the plotter mechanisms.
A set of cartridges was supplied with the plotter:
330
350C
For the 350C, each stall in the carriage has a dot indicating the color of the
cartridge that should be installed: you must put the correct cartridge in the correct
stall. The sequence of the stall colors is, from left to right, yellow, cyan, magenta
and black.
For users with color-vision deficiencies. You can identify the colors of the
cartridges by the part numbers on the boxes – see page 10–17.
Note. It is not recommended to operate the 350C with only the black cartridge
loaded.
The HP DesignJet 330 is supplied with one black cartridge.
The HP DesignJet 350C is supplied with four cartridges:
–
yellow
–
cyan
–
magenta
–
black
Setting up your plotter
Task 5: Load the print cartridge(s)
Yellow
Cyan
Magenta
Black
00019
1–11