HP Designjet 350C User Manual page 122
Hewlett-packard designjet plotters user's guide
Hide thumbs
Also See for Designjet 350C:
- Service manual (268 pages) ,
- User manual (184 pages) ,
- Service manual (16 pages)
Table of Contents
Advertisement
Maintaining your plotter
Cleaning the cartridge nozzles (priming)
350C
3
4
350C
5
Repeat steps 3 and 4 for any other cartridges to be primed.
Note. It is not necessary to return the selectors to their original positions.
6
Lower the cover.
7
If you interrupted the print, the plotter now resumes it. Ignoring that part of the
drawing immediately after the interruption (where print quality cannot be
guaranteed), check the rest of the print to see if the problem has been resolved.
7–8
Press the small green selector in front of the cartridge which you want to
prime.
Firmly press the large green
plunger fully down once, and
then release it.
The plunger should return to its
original position.
1745
r1755
Advertisement
Table of Contents
