HP DesignJet 250C Service Manual page 82

330
Removing the Spittoon
350C
1 Remove the right end cover ' page 6 10.
2 Move the pinch arm lever linkage upwards
so you can access the screw that attaches
the spittoon to the right side plate.
3 Remove the screw that attaches the
spittoon to the right side plate.
6 24 Removal and Replacement
4 Disconnect the pinch arm sensor cable
from the main PCA (connector PINCH).
5 Slide the spittoon to the right, and
remove it from the plotter.
Torx-20
C4699 90000