Reinstalling the Overdrive
Enclosure
The order in which you replace the screws on
the overdrive enclosure is important.
C A U T I O N
Take care not to damage the media sensor
flags. The overdrive enclosure should not
touch them.
1 Replace the two indicated screws. (Short
dog point screws.)
1
Torx-15
C4699 90000
2 Insert the two indicated screws, but do
not tighten them. (Long dog point
screws.)
3
Torx-15
3 Replace the indicated screw and tighten
it, thus aligning the overdrive enclosure
with the left side plate.
2
4 Tighten the screws you inserted in step 2.
Torx-15
Torx-15
4
Torx-15
5
Removal and Replacement
6 47