HP DesignJet 250C Service Manual page 185

Printing the Service Configuration Plot
1 To print the service configuration plot:
230
In service mode 2, load a sheet in portrait orientation.
250C
330
In normal mode, load a sheet in portrait orientation.
350C
The service configuration plot can be plotted without the need to enter the service
mode. This is because the customer will be requested to plot the service configuration
plot and he will be given the following instructions to plot it without entering the
service mode.
2 When the
Ready
230
Hold down the
SHIFT
250C
330
Press the
Cancel
350C
The light begins to flash and then remains on (steady).
Ready
The plotter plots the service configuration plot and ejects the media.
3 Unload the media.
C4699 90000
LED lights up:
key and press
Service Configuration
and keys together.
Media Type
Service
.
Configuration
Cancel Media
Type
Troubleshooting
Shift
Ready
Ready
8 51