Terminal Id Table; Data Format Editor Commands - Honeywell Voyager 1450g Series User Manual

Terminal ID Table

Terminal
USB
Serial
Keyboard

Data Format Editor Commands

Send Commands
Send all characters
F1 Include in the output message all of the characters from the input message, starting from current cursor position,
followed by an insert character. Syntax = F1xx where xx stands for the insert character's hex value for its ASCII code.
Refer to the ASCII Conversion Chart (Code Page 1252),
Send a number of characters
F2 Include in the output message a number of characters followed by an insert character. Start from the current cursor
position and continue for "nn" characters or through the last character in the input message, followed by character "xx."
Syntax = F2nnxx where nn stands for the numeric value (00-99) for the number of characters, and xx stands for the the
insert character's hex value for its ASCII code.
Refer to the ASCII Conversion Chart (Code Page 1252),
F2 Example: Send a number of characters
Send the first 10 characters from the bar code above, followed by a carriage return. Command string: F2100D
F2 is the "Send a number of characters" command
10 is the number of characters to send
0D is the hex value for a CR
The data is output as: 1234567890
F2 and F1 Example: Split characters into 2 lines
Send the first 10 characters from the bar code above, followed by a carriage return, followed by the rest of the charac-
ters.
Command string: F2100DF10D
F2 is the "Send a number of characters" command
10 is the number of characters to send for the first line
0D is the hex value for a CR
F1 is the "Send all characters" command
0D is the hex value for a CR
Model(s)
PC keyboard (HID)
Mac Keyboard
PC Keyboard (Japanese)
Serial (COM driver required)
HID POS
USB SurePOS Handheld
USB SurePOS Tabletop
RS232 TTL
RS232 True
PS2 compatibles
beginning on page A-3 for decimal, hex and character codes.
beginning on page A-3 for decimal, hex and character codes.
Terminal ID
124
125
134
130
131
128
129
000
000
003
6 - 3