Table of Contents
Advertisement
On a FreeBSD system, you can use the "dd" command to make the driver diskette. For
example, Insert a floppy disk into the floppy drive and type the following command if
you are installing FreeBSD versions:
# dd if=rr3xxx_4xxx-bsd.img of=/dev/fd0
Step 4 Install FreeBSD
1. Start installing the FreeBSD by booting from installation CD.
2. If you are installing FreeBSD 5.0 or earlier versions:
When "Hit [enter] to boot immediately or any other key for command prompt"
screen appears, press SPACE key to stop loader from autobooting.
BTX loader 1.00 BTX version is 1.01
Console: internal video/keyboard
BIOS driver A: is disk0
BIOS driver B: is disk1
BIOS driver C: is disk2
BIOS 636kB/74512kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(mailto:jkh@narf.osd.bsdi.com, Sat Apr 21 08:46:19
GMT 2001)
-
Hit [Enter] to boot immediately, or any other key for
command prompt.
Booting [kernel] in 9 seconds¡-
<-press SPACE key
For 5.1 or later version:
when "Welcome to FreeBSD" screen appears, select "6".
3.
A prompted label "ok" will appear at the botton of the screen.
4. Insert RR3xxx/4xxx driver diskette into floppy drive now. Type in "load diskx:
hptiop-x.x" (without quotation mark) and then press enter.
for FreeBSD 4.3-RELEASE
ok load kernel
ok load disk1:hptiop-4.3.ko
for FreeBSD 4.4-RELEASE
ok load kernel
FreeBSD Driver Support
7-2
Hide quick links:
Advertisement
Table of Contents
