Table of Contents
Advertisement
RocketRAID 4320 BIOS Utility
Note:
Variable Sector Size (VSS) for over 2TB support in 32bit LBA OS.
It changes the sector size from default 512 Bytes to 4k Bytes etc. the maximum volume
capacity up to 16TB. This option works under Windows platform only. And it CANNOT be
converted to Dynamic Disk, because 4k sector size is not a standard format.
View an Array
To view information about a specific Raid array, use the TAB key to switch to the
Array Interface view, and use the ↑ ↓ arrows keys to select the array. After selecting
the array, access the Array menu and select the Information option, then press
ENTER.
Other RAID array related functions
"Array->Delete", "Array->Unplug", "Array->Verify", "Array->Start task", "Array->
Stop task" and "Array->Set Boot" work in the same manner as the "View an Array"
function.. Highlight the desired array using the Array Interface view, and press
ENTER.. Return to the Array menu, select the desired function, and press ENTER to
initiate the task.
Delete – use this option to delete the selected array.
Warning: all data on the selected array will be lost
Unplug – use this option to safely remove each disk member of the selected array.
This allows you to safely park and power off each hard disk while the system remains
active.
Verify – select this option to verify the integrity of the selected array. Routine RAID
verification is essential to avoid data loss in the case of disk failure.
3-4
Hide quick links:
Advertisement
Table of Contents
