HighPoint RocketRAID 4520 Quick Installation Manual
  1. Manuals
  2. Brands
  3. HighPoint Manuals
  4. Host Adapter
  5. RocketRAID 4520
  6. Quick installation manual

HighPoint RocketRAID 4520 Quick Installation Manual

6gb/s sas/sata raid on chip host adapter
Hide thumbs Also See for RocketRAID 4520:
Table of Contents

Advertisement

Quick Links

Download this manual
RocketRAID 4520
6Gb/s SAS/SATA RAID on Chip Host Adapter
Quick Installation Guide
v1.0
1 
 

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RocketRAID 4520 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HighPoint RocketRAID 4520

Summary of Contents for HighPoint RocketRAID 4520

  • Page 1 RocketRAID 4520 6Gb/s SAS/SATA RAID on Chip Host Adapter Quick Installation Guide v1.0 1   ...

  • Page 2: Table Of Contents

    Contents Hardware Installation....................3 Kit Content......................3 RocketRAID 4520 board layout……………..........3 Installing the RocketRAID 4520 Host Adapter..........4 Using the RocketRAID 4520 Adapter................5 RocketRAID 4520 BIOS Setting Utility............5 Driver and Utility Installation (Windows 7, Vista, 2008)......6 Customer Support......................7 FCC Part 15 Class B Radio Frequency Interference statement......8 2 ...

  • Page 3: Hardware Installation

    Software CD RR4520 Board Layout: Connector and Jumper description: J6: BBU (Battery Backup Unit) connector. The RocketRAID 4520 supports the HighPoint BBU-05 battery backup unit. Please refer to the BBU-05 user’s manual for the proper installation procedure. J9: I2C connector A1, A2: Active LED PIN connector.

  • Page 4: Installing The Rocketraid 4520 Host Adapter

    1) Open the system chassis and locate an unused PCI-E (2.0 or 1.0) ×8 (or x16) slot. 2) Remove the PCI-E slot cover. 3) Gently insert the RocketRAID 4520 into the PCI-E slot, and secure the bracket to the system chassis. 4) After installing the adapter, attach the hard disks or backplane enclosure to the host adapter using the mini-SAS cables.

  • Page 5: Rocketraid 4520 Bios Setting Utility

    Using the RocketRAID 4520: RocketRAID 4520 BIOS Setting Utility After installing the RocketRAID 4520 host adapter, and powering on the system, the RocketRAID 4520 BIOS will post. Press <Ctrl>+<H> Key combination to run the BIOS setting utility. Note: Scan time may vary depending on the disk’s make/model and disk related features such as Staggered Drive Spinup.
  • Page 6 Driver and Software Installation (Windows 7, Vista, 2008) 1. After installing the RocketRAID 4520 host adapter, boot to the Windows operating system. 2. Windows should automatically detect the card, and display the “Found New Hardware Wizard”. Select “Locate and install driver software”.

  • Page 7: Customer Support

    Customer Support If you encounter any problems while utilizing RocketRAID series host adapters, or have any questions about this or any other HighPoint Technologies, Inc. product, feel free to contact our Customer Support Department. Web Support: http://www.highpoint-tech.com/websupport/ HighPoint Technologies, Inc. websites: http://www.highpoint-tech.com...

  • Page 8: Fcc Part 15 Class B Radio Frequency Interference Statement

    FCC Part 15 Class B Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Table of Contents