RocketRAID 4320 Driver and Software Installation
5.
When asked: "Would you like to install this driver software?", select "Install".
6.
Reboot the system when prompted. The RocketRAID 4320 will be available
for use after Vista reboots.
Installation Verification
After the driver has been installed, and the system has been restarted:
1.
Click the Start button, then right-click My Computer icon. Select the Properties
item from the popup menu.
2.
In the popup window, select Hardware tab and then click Device Manager button.
3.
Double click the "SCSI and RAID controllers" entry. If the RocketRAID device
entry is not displayed, or there are "?" or "!" marks displayed near the
RocketRAID entry, the driver has not been installed properly. Delete the entries
and reinstall the driver.
4-5