Linux Driver Support
5 - Updating the Driver
1. If the original driver is installed in the system initrd file (e.g. when OS is installed
to RR4320 controller), you can update the driver as below:
# cp hptiop.ko /lib/modules/'uname –r'/updates/
# mkinitrd 'uname –r'
For FC2, the commands should be
# cp hptiop.ko /lib/modules/'uname –r'/kernel/drivers/scsi/
# mkinitrd –-preload scsi_mod –-preload sd_mod –-with=hptiop /boot/
initrd-'uname –r'.img 'uname –r'
It's recommended to backup the original initrd file before you update the driver.
2. If the original driver is installed in the /lib/modules/'uname –r'/kernel/drivers/scsi/
directory, and load it by the script file (e.g. /etc/init.d/hptdriver) during the init
process, please replace it with the new driver (hptiop.o or hptiop.ko)
6 - Installing RAID Management Software
HighPoint RAID Management Software is used to configure and keep track of your
hard disks and RAID arrays attached to RR4320 controller. Installation of the manage-
ment software is optional but recommended.
Please refer to HighPoint RAID Management Software documents about more
information.
6-7