Table of Contents
Advertisement
Linux Driver Support
RR4320 driver on an Existing System". Overwrite the driver file in the directory
"/lib/modules/`uname –r`/kernel/drivers/scsi/". #cp –f /tmp/hptiop.ko /lib/
modules/`uname –r`/kernel/drivers/scsi/
2. If you are using a system installed to RR4320 controller, you can update the driver
file in the directory "/lib/modules/`uname –r`/updates/", then update the initrd
file.
#cp –f /tmp/hptiop.ko /lib/modules/'uname –r'/updates/
#mkinitrd initrd-'uname –r'.img 'uname –r'
If you are using lilo to boot your system, use "lilo" to reinstall the RAM disk:
# lilo
6 - Installing RAID Management Software
HighPoint RAID Management Software is used to configure and keep track of your
hard disks and RAID arrays attached to RR4320 controller. Installation of the manage-
ment software is optional but recommended.
Please refer to HighPoint RAID Management Software documents about more
information.
7 - Uninstalling
You can only uninstall the driver when your system is not booting from devices
attached to RR4320 controller. Just remove the lines you added to /etc/fstab, and
remove the file files you created in the /etc/init.d.
6-19
Hide quick links:
Advertisement
Table of Contents
