Linux Driver Support
the floppy drive and then select "OK". The system will load RR4320 driver
automatically. When prompted "Do you wish to load any more driver disks?"
Select "No".
9. When prompted for an update disk source, select fd0. The installer will read
updates from the driver floppy.
10. Continue the installation as usual. Do not remove the floppy diskette until
installation completed.
Installation steps for Fedora Core5 & Core6
1.
Start installing Fedora Linux by booting from the installation CD.
2. On "Welcome to Fedora Linux" installation screen, a prompted label "boot:" will
appear at the bottom of the screen. Type in "linux dd updates" (without quota-
tion mark) and then press Enter.
3.
When prompted "Do you have a driver disk?". Select "Yes". When prompted
"Insert your driver disk and press OK to continue", insert the driver diskette in
the floppy drive and then select "OK". The system will load RR4320 driver
automatically.
4.
When prompted for an update disk source, select fd0. The installer will read
updates from the driver floppy.
5. Continue the installation as usual. Do not remove the floppy diskette until
installation completed.
Then switch back to console 1 and finish the installation.
6-3