Driver And Webgui Software Installation - HighPoint RocketStor 6328 User Manual

6.3 Driver and WebGUI Software installation

1) Driver Installation: Mac OS X
a. Please visit
Unzip the package.
b. Double-click the "uninstall.command" script file to uninstall the currently installed driver.
c. Double-click the "HighPointIOP.mpkg" icon to install the driver package. You will be asked to input
the administrator's password in order to complete this. Once complete, you will be asked to reboot
the system. Confirm the prompt to proceed.
d. Verifying Driver Installation: Mac OS X
e. After the driver has been installed and the system rebooted, verify the RS6328 device status using
the OS X System Information pane.
To verify the RS6328 driver status,
Click the Apple icon on top left of the screen, and select About This Mac, and then select More Info.
Next, select System Report, and click PCI Cards on left side of the System Information pane. The
Driver Installed entry for controller pci1103, 6328 should be "Yes"
2) RAID Management software installation.
In order to configure and manage the HighPoint RAID array, you will need to install the Web RAID
Management software (also known as the WebGUI).
a. Download and install the RAID Management software from the RS6328 product
http://www.hptmac.com/series_RS6328-Resources.php
b. Unzip the package and double-click the
asked to input the system administrator's password to complete installation.
c. Running the WebGUI
After installation is complete, a WebGUI icon will be displayed on the desktop.
HighPoint Technologies Inc.
http://www.hptmac.com/series_RS6328-resources.php
"HighPoint WebGUI" icon to install the WebGUI. You'll be
for the latest driver package.
page:
7