Hipath 4000 As An Internal Two-Way Intercom System; Way Calling System) - Siemens HiPath 4000 Operating Manual

Making Calls – Enhanced Functions
Step by Step
72
HiPath 4000 as an Internal Two-Way
Intercom System (Intercom and Two-

Way Calling System)

You can set up a call by addressing an internal user at
the HiPath 4000 directly over the speaker on his or her
phone. You can also initiate a two-way speaker call from
a consultation call. The following functions are possible:
• System-wide two-way speaker call
– to a variable destination
– to a fixed destination
• Two-way speaker call in a group
– to a variable destination
– to a fixed destination
• Two-way calling within a group
– to a variable destination
– to a fixed destination
• Broadcast call to all members of a line trunk group
You can cancel the two-way speaker call or broadcast
call by pressing the on-hook key or resuming the held
call during a consultation call.
Ensure that speaker call protect is deactivated
for all functions at the relevant
phones Page 101. Speaker call protection is de-
activated via a configured key in telephones with-
out display, for example, optiPoint 410 entry.
If a station where speaker call protect is active is
addressed directly, the two-way speaker call is ig-
nored and replaced by a normal call.