Deactivating Identification At Another Phone - Siemens HiPath 4000 Operating Manual

Step by Step
~
Enter the code!
v
Call forw. - follow me?
Save?
v
Program/Service?
v
PIN / COS?
v
Deactivate PIN?
The following applies within your own HiPath 4000
system:
~
Enter the internal PIN.
or The following applies within your own and another
HiPath 4000-system in the network:
Enter the two-digit node code for your own HiPath 4000
system (consult your service personnel).
~#
Enter your own station number and press the POUND
key.
~#
Enter the network-wide PIN and press the POUND key.
Dialing after successful identification:
You hear the dial tone.
"Please dial" appears on the screen.
~
Enter a station number immediately.
Setting follow-me call forwarding after successful
identification
OK
Select and confirm.
OK
Confirm. Call forwarding is immediately active.
Deactivating Identification at Another
Phone
OK
Select and confirm.
LL
Enter the service code.
or
OK
Select and confirm.
OK
Select and confirm.
Identification automatically deactivates if the
third-party phone is idle for a few minutes.
Additional Features/Services
105