Making Calls - Basic Functions; Accepting A Call; Ending A Call; Dialing/Making Calls - Siemens HiPath 4000 Operating Manual

Making Calls – Basic Functions
Step by Step
c
26
Making Calls – Basic Functions

Accepting a Call

An incoming call is signaled in four different ways on the
handset:
• the handset rings and/or vibrates
• the handset lights up
• a display appears on the screen
• the speakerphone key LED flashes
You can accept the call in one of the following ways:
d
or Press the talk key or the speakerphone key.
or Remove the handset from the charging unit ("Auto An-
swer" must be activated

Ending a Call

a
Press the on-hook key.

Dialing/Making Calls

~
Internal: Enter the station number.
External: Enter the external code and station number.
c
Press the talk key.
or
c
Hold down the talk key.
~
Internal: Enter the station number.
External: Enter the external code and station number.
Page 113).