System-Wide Two-Way Speaker Call - Siemens HiPath 4000 Operating Manual

Step by Step
c
c
~
Enter the code!
q
Spkr. 2-way
q

System-Wide Two-Way Speaker Call

You can use your handset to set up a two-way speaker call
to any internal party who has a phone that supports speak-
erphone mode or has a speaker.
A connection is immediately set up if
• the other party is not busy
• speaker call protect is not activated
Ö
As the caller, you receive a confirmation tone if the con-
nection is set up and talking is possible.
d
or As the called party, press the talk key to accept the call.
If the called party presses the speaker key, the connec-
tion is cancelled.
The number of possible two-way speaker calls is
the same as the number of possible normal con-
nections.
Two-way speaker calls to a variable destination
d
or Press the talk key or the speakerphone key.
System code for "Two-way speaker call"
or
FCN
Press the display key.
OK
Select and confirm (must be configured).
~
Enter the internal station number of the party.
Two-way speaker call to a fixed destination
The system code for the two-way speaker call and the
destination station number are saved as an FCN entry
Page 41.
FCN
Press the display key.
OK
Select and confirm the relevant entry.
A connection to the destination's speaker is immediate-
ly set up.
Making Calls – Enhanced Functions
73