Changing The Contrast For Fcn Labeling; Adjusting The Speakerphone To The Room Acoustics; Changing The Volume Of The Alert Tone - Siemens HiPath 4000 Operating Manual

Making Calls – Basic Functions
Step by Step
S or C Press one of these keys while the handset is idle.
v
Label contrast?
S or C Change the contrast (1 - 4). Keep pressing the keys until
S or C Press one of these keys while the handset is idle.
v
Speakerphone mode?
S or C Set the room type. Keep pressing these keys until the
S or C Press one of these keys while the handset is idle.
v
Warning tone?
S or C Change the volume (1 - 8). Keep pressing the keys until
46

Changing the Contrast for FCN Labeling

OK
Select and confirm.
the desired contrast is set.
OK
Save.
Adjusting the Speakerphone to the Room
Acoustics
To make sure the other party understands you clearly
while talking into the microphone, you can adjust the
handset to the acoustics of your environment, for exam-
ple, "Room with echo", "Normal room" or "Quiet room".
OK
Select and confirm.
setting you want appears on the screen.
OK
Save.

Changing the Volume of the Alert Tone

An alert tone sounds, for example, if you receive a sec-
ond call while you are conducting a call or if a call is not
accepted in your team.
OK
Select and confirm.
you are happy with the volume.
OK
Save.