Broadcast (Announcement) To All Members Of A Line Trunk Group - Siemens HiPath 4000 Operating Manual

Making Calls – Enhanced Functions
Step by Step
~
Enter the code!
q
76
Broadcast (Announcement) to all Members of
a Line Trunk Group
You can use this function to broadcast a call simulta-
neously to all members (10 to 40) of a line trunk group.
Ö
As the caller, you receive a confirmation tone if the con-
nection is set up and talking is possible.
c d
or Press the talk key or the speakerphone key.
System code for "Broadcast"
or
FCN
Press the display key.
OK
Select the FCN entry for "Broadcast" (must be config-
ured).
~
Internal station number of a group member.
Ending a broadcast call
a
Press the on-hook key.
If a group member lifts the handset, he or she is
connected to you and the broadcast call is end-
ed. If a group member presses the speaker-
phone key, the broadcast call is disconnected at
his or her station.