Conducting Calls - The Basic Functions; Activating/Deactivating The Handset - Siemens HiPath 3000 Operating Manual

Conducting calls – the basic functions
Step by Step
Please enter
PIN:
2
Conducting calls –
the basic functions
You can use your handset to make both internal and ex-
ternal calls.
Internal calls are calls that
• you make within the range of a communication sys-
tem, forexample, within your company,
• you make between networked communication sys-
tems, forexample, to different company locations.
External calls are calls that you conduct with users of
the public telephone network.

Activating/deactivating the handset

Press the On-hook key until the activation or deactiva-
tion is confirmed by a crescendo tone sequence.
PIN
If the default PIN has not been changed (0000), the
handset is ready for operation as soon as it is switched
on. If a PIN was set, the PIN must be entered before the
handset can be operated.
o
Enter the PIN
[
Confirm your entry. The handset is ready to use.
Displaying the connection quality
The strength of the incoming signal is displayed by the
"receive field strength" icon in on or message status:
|
flashing, no reception
Ò
Low receive field strength
Ñ
50% receive field strength
i
75% receive field strength
Ð
100% receive field strength
The radio range is different indoors and outdoors
( Page 131). Please consult your system administra-
tor in the event of range problems.