Toshiba B-EX4T2 SERIES Owner's Manual page 118

7. SUPPLY SPECIFICATIONS
For 600dpi model
Print
Ribbon
Mode
Thermal
transfer BEX-*****AS1
type
Direct
thermal
type
NOTES:
*1: Since the print tones provided in the above table are the recommended values, the variance should be
taken into consideration when in use.
*2: The print energy type must be set the above table by all means. For setting method of the print energy
type, refer to the Key Operation Specification.
*3: It limits print tone fine adjustment for the protection of thermal head by the rating of the maximum supply
energy of thermal head. The tone of printing do not thicken even if it is set print tone fine adjustment
value more than the value of the list shown below.
Print
energy type
Standard
Resin1
Resin2
Paper
2"/s 3"/s
FR1412-50 +6 +6
FR1615-50 +4 +2
150LA-1P 0
2"/s
+10
+10
+10
Print speed
4"/s 5"/s 6"/s
+6 +6 +6
+4 +6 +2
0 0 0 0
Print tone fine adjustment limit
3"/s 4"/s
+10 +10
+10 +10
+10 +10
E7-16
ENGLISH VERSION EO1-33094
7.3 Recommended Media and Ribbon Types
Print
Remarks
energy type
Resin1
Resin1
Standard
5"/s
+10
+10
+6
6"/s
+10
+9
0