Print Test - Toshiba B-EX4T2 SERIES Owner's Manual

B-ex4t2 series
Hide thumbs Also See for B-EX4T2 SERIES:
Table of Contents

Advertisement

2. PRINTER SETUP
2.8

Print Test

After your operating environment has been set, perform a print
test.
1. Perform a print test by using the Printer Driver or an Issue
Command.
The printer driver's Properties screen allows you to set the
communication conditions, media size, and other printing
conditions in accordance with your operating environment. For
details, refer to the Help for the Windows Printer Drivers
screen.
Example: Stock tab display of the Printer Driver's Properties Screen
Print Method
Sensor
Label Gap
Mode
Issue
Post-print Action
(Cut)
Print Speed
Fine Adjustment
Print Method:
Sensor:
Issue Mode:
Post-print
Action:
Fine
Adjustment:
2. Confirm the print test result.
When a print start position, cut/strip position, or print tone
needs to be adjusted: ⇒ Section 2.9 Position and Print
Tone Fine Adjustment
When pre-printed media is used, and if a print start position is
not properly detected: ⇒ Section 2.10 Threshold Setting
E2-59
Direct
thermal
or
selectable.
Media sensor type is selectable.
Batch, strip or cut is selectable.
Whether to use the cutter or not is
selectable.
Adjustment values for the feed amount,
cut/strip position, etc. can be set.
ENGLISH VERSION EO1-33094
2.8 Print Test
thermal
transfer
is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents