Toshiba B-EX4T2 SERIES Owner's Manual page 104

7. SUPPLY SPECIFICATIONS
Max.
7. effective
print width
Label
Effective
8.
print length
Tag
Slow-up and
down area
9.
(Un-print
Slow-down
area)
Paper
10.
thickness
Paper
11.
thickness
can be cut
12. Max. paper roll diameter
13. Paper winding direction
14. Paper core
NOTES:
1. To ensure print quality and print head life use only TOSHIBA TEC specified media.
2. When using the peel-off at 12"/sec or more for 203dpi model, issue at 10"/sec.
When using the peel-off at 10"/sec or more for 300dpi model, issue at 8"/sec.
3. When using the disk cutter, the label length must meet the following condition:
Label length 18.0mm - (Gap length/2).
4. The Strip Module do not support the print speed of 10"/sec. or faster.
5. The ratio of a label length to a gap length must be a minimum of 3 to 1 (3:1).
6. When using label stock in cut mode, be sure to cut in the gaps. Cutting labels will cause the adhesive
to stick to the cutter, which may affect the cutter performance and shorten the cutter life.
7. When the Strip Module is used on the GS12 (203 dpi) model, the print speed is automatically corrected
to 10"/sec. if 12"/sec. or faster is specified.
When the Strip Module is used on the TS12 (300 dpi) model, the print speed is automatically corrected
to 8"/sec. if 8"/sec. or faster is specified.
Max. 104.0 +-0.2
Min. 6.0 15.0
Max. 1496.0 1496.0
Min. 8.0
－
Max. 1498.0 －
Slow-up
Min. 0.13
Max. 0.17
Min. -
Max. -
φ200
(Using external rewinder φ180)
Inside the printing side
(STD.)
Inside diameter
φ76.2±0.3
17.0 6.0
1492.0 1496.0
19.0 8.0
1498.0 1498.0
1.0
1.0
0.08 -
0.17 -
(Using external rewinder φ180)
Inside the printing side
Inside diameter
E7-２
ENGLISH VERSION EO1-33094
104.0 +-0.2
15.0 17.0 3.0
1496.0 1492.0 496.0
21.4 5.0
－
－ 1498.0 498.0
1.0
1.0
0.13
0.17
0.08
0.17
φ200
(Using external rewinder φ180)
Inside the printing side
(STD.)
φ76.2±0.3
7.1 Media
104.0 +-0.2
8.0 17.0
496.0 492.0
19.0
－
－ 498.0
1.0
1.0
0.13
0.17
- 0.08
- 0.17
φ200
(STD.)
Inside diameter
φ76.2±0.3