Extron electronics CrossPoint 300 84 User Manual page 47

3. Press and release the Output 1 button (figure 3-39).
Press and release the Output 1 button.
The LED blinks to indicate that this preset
number is selected but not recalled.
1 2 3
1 2 3
Preset 13 Preset 14 Preset 15
Figure 3-39 — Select the preset
4. Press and release the Enter button (figure 3-40). The configuration stored in
memory location 13 is now the current configuration and can be viewed in the
View-only mode (see example 4).
Press the Enter button to
recall the preset.
CONTROL
ENTER PRESET VIEW
The Enter and Preset LEDs
return to the unlit state.
Figure 3-40 — Press the Enter button
CrossPoint 300 Matrix Switchers • Operation
CONTROL
4
ENTER PRESET VIEW
4
Preset 16
The Enter LED blinks to indicate
the need to recall the preset.
The Preset LED remains lit.
ESC
All input LEDs
return to the
unlit state.
3-23