Extron electronics CrossPoint 300 84 User Manual page 82

Programmer's Guide, cont'd
Command/response table for SIS commands (Cont'd)
Command
View ties, gain, mutes, and presets (continued)
View file directory
Serial port configuration
Read port parameters
Set mode
Read mode
Information requests
Information request
Example (CrossPoint 300 816 HVA): I
Request part number
Example (CrossPoint 300 168 HVA): N
There are two separate sets of Extron firmware that the switcher can report on:
the CrossPoint 300 controller firmware, which is the overall control firmware; and the latest
optional Extron firmware update, which is available at www.Extron.com.
Query controller firmware version
Example:
Query software version (verbose)
Response description: Controller firmware version
Example:
Description
n.nn-1.00(1.06-16x16 Series - , 00
Response:
Meaningless data CrossPoint 300 firmware version
for this switcher model
Request system status
Response description: +3.3 V•+5 V•-5 V•+15 V•-15 V•Temp
Example:
4-12 CrossPoint 300 Matrix Switchers • Programmer's Guide
ASCII Command Response
(host to switcher) (switcher to host)
DF filename1,date/time,length
Esc
filename2,date/time,length
filename3,date/time,length
filenamen,date/time,length
space_remaining Bytes•Left
1CP , ,
Esc X14 X15 X16
1* CY Cpn1•Cty
Esc X18
1CY
Esc X18
I V X •A
X2 X3
V08X16•A08X16
N xx-xxx-xx
60-330-16
Q
X11
Q 1.23
-
0Q
X12 X12
-
updated firmware version
0q
* indicates the version running
2000 00:00:00 GMT)-1.00*(1.06-16x16 Series -Thu, 20 Mar 2003 16:39:21 GMT)
S • •
X19 X19
S 3.24•4.94•-5.23•15.03•-14.91•114.80
3.3 V power at 3.24 V
Additional description
List user-supplied files.
• •
• •
,
X17
X18
X V X = V size, A
X2 X3 X2 X3
8 video and 8 audio inputs by
16 video and 16 audio outputs.
See appendix A for part #s.
The factory-installed
CrossPoint 300 controller
firmware version is 1.23
(sample value only).
Provide a detailed status of the
CrossPoint 300 controller
firmware and any firmware
upgrade. The firmware that is
running is marked by asterisk (*).
A caret (^) indicates that the
firmware has a bad checksum or
an invalid load. ?.?? indicates
that firmware is not loaded.
Upload date and time
Updated firmware version
• • •
X19 X19 X19 X20
15 V power at 15.03 V
Temp 114.8º F
X = A Size.
X2 X3