Example 7: Recalling A Preset - Extron electronics CrossPoint 300 84 User Manual

Operation, cont'd
4.
Figure 3-36 — Press the Enter button

Example 7: Recalling a preset

The following steps show an example in which a preset is recalled to become the
current configuration in a CrossPoint 300 84. The steps show the front panel
indications that result from your actions.
1.
Figure 3-37 — Clear all selections
2.
Figure 3-38 — Enter Recall Preset mode
3-22 CrossPoint 300 Matrix Switchers • Operation
Press and release the Enter button (figure 3-36). The current configuration is
now stored in memory location 17.
Press the Enter button to
save the preset.
CONTROL
ENTER PRESET VIEW ESC
All input LEDs
return to the
The Enter and Preset LEDs
unlit state.
return to the unlit state.
Press and release the Esc button (figure 3-37).
Press the Esc button to clear all selections.
CONTROL
ENTER PRESET VIEW ESC
Press and release the Preset button (figure 3-38).
Press and release the Preset button.
The Preset LED lights.
All input and output LEDs with
assigned presets light.
PRESET
The LED
blinks once.
Unlit
Lit
(Preset Unassigned)
(Preset Assigned)
1 2 3
Preset 13 Preset 14 Preset 15
4
Preset 16