Windows Buttons, Drop Boxes, And Trash; Windows Menus; File Menu - Extron electronics CrossPoint 300 84 User Manual

Matrix Software, cont'd

Windows buttons, drop boxes, and trash

The buttons, drop boxes, and trash can on the right side of the
program window perform the following functions:
Power — Unavailable for these switchers.
Executive mode — Allows you to lock out front panel operations,
Presets menu — Displays a list of up to 32 global presets. You can
Go — Activates the selected preset as the current configuration.
Save as — Allows the current set of ties to be saved as a preset. Enter
Delete — Allows the current preset to be deleted.
Changes – Take — Allows you to save to file any changes made to the displayed
Changes – Cancel — Returns to the previous screen, undoing any changes you
Trash can — Drag and drop from an input or output button to the trash to remove

Windows menus

File menu

Save matrix settings as — Saves a complete set of up to 32
Restore matrix settings from — Loads and activates a
Save this-session's settings — Saves the current assigned icons and icon captions.
Restore last-session's settings — Loads the icons and icon captions that were
Select printer — Selects the target printer.
Print tie map — Prints the tie set that is displayed on the screen.
Exit — Closes the Matrix Switcher+ Control Program.
5-8 CrossPoint 300 Matrix Switchers • Matrix Software
except for the view-only mode functions. Click the button to
cycle between Lock mode 0 (the indicator displays white), Lock
mode 1 (the indicator displays red), and Lock mode 2 (the
indicator displays orange).
See "Setting the front panel locks (Executive modes)" in
chapter 3, "Operation" for more information on the Lock
modes.
select a preset from the list to display it in the window and
either activate it (Go) or delete it (Delete).
the preset number when prompted to do so.
configuration.
have made.
all ties associated with that input or output.
presets, plus the last active setting (preset #0), to a
file. Saved settings include audio gain settings (if
specified), assigned icons, and icon captions.
previously saved setting file.
saved during the last session. If you saved the previous session's changes to
disk the last time you exited the program, the ties from that session are also
loaded.