Extron electronics CrossPoint 300 84 User Manual page 88

Matrix Software, cont'd
5.
Figure 5-7 — Open window
6.
7.
5-6 CrossPoint 300 Matrix Switchers • Matrix Software
Click Tools > Update firmware. The Extron Firmware Loader utility appears
(figure 5-7).
Click Browse. The open file window appears.
Navigate to the folder where you saved the firmware upgrade file. Select the
file and click Open. The Firmware Loader returns to the top.
Valid firmware files must have the file extension .S19. Any other file extension
is not a valid firmware upgrade.
The original factory-installed firmware is permanently available on the
switcher. If the attempted firmware upload fails for any reason, the switcher
reverts to the factory-installed firmware.