Extron electronics CrossPoint 300 84 User Manual page 37

1.
Figure 3-16 — Clear all selections
2.
Figure 3-17 — Select audio only
3.
Press and release the Input 5 button.
The LED lights.
2 3 4 5
Figure 3-18 — Select an input
4.
This example assumes that you have performed example 1 and example 2.
Press and release the Esc button (figure 3-16).
Press the Esc button to clear all selections.
CONTROL
ENTER PRESET VIEW ESC
To select audio only for the tie, if necessary, press and release the RGBHV
button and/or Audio button (figure 3-17).
Press the RGBHV button to toggle on and off.
The LED is unlit when deselected.
Press and release the input 5 button (figure 3-18).
The Output 3, Output 4, and Output 8 LEDs light to indicate
INPUTS
the audio ties created in example 1.
6 7
The output 1 LED does not light to indicate the tie created
in example 2 because that tie is RGBHV only.
1
Press and release the output 4 button (figure 3-19).
CrossPoint 300 Matrix Switchers • Operation
The LED
blinks once.
I/O
RGBHV AUDIO
Press the Audio button to toggle on and off.
The LED lights when selected.
2 3 4 5
OUTPUTS
6 7 8
3-13