Enzo Configuration
Reset and Update
The Reset and Update screen (FIG. 54) list a set of options to reset the Enzo Meeting Presentation System to its factory
settings or update the firmware.
FIG. 54
Reset and Update screen
The following table lists the options on the Reset and Update screen:
Reset and Update Options
Factory Data Reset
Reset Settings
Update Firmware
Diagnostics
The Diagnostics screen (FIG. 55) displays the temperature of the Enzo Meeting Presentation System and provides an
option to view a log file. Also featured is the option to enable or disable Secure Shell (SSH) access. If SSH is disabled,
you cannot access the Enzo through AMX Shell. See the AMX Shell section on page 61 for more information.
FIG. 55
Diagnostics screen
The following table lists the options on the Diagnostics screen:
Diagnostics Options
Temperature
Logs
SSH
44
This option lets you reset the Enzo's data to its factory settings.
This option lets you reset the Enzo's settings to its factory default settings.
Click Yes to confirm you want to reset the settings.
This option lets you update the firmware file for the Enzo. You can revert to a
previous firmware version or to the factory version, if necessary. See the
Updating Firmware from USB section on page 45 for full instructions on
upgrading your firmware.
This option lets you view the current temperature of the Enzo device. This
option is view-only.
This option opens a log file in which you can view system and application
diagnostics log messages.
This option lets you toggle whether SSH is enabled. If SSH is disabled, you
cannot access Enzo via AMX Shell. This option is enabled by default.
Instruction Manual - NMX-MM-1000 Enzo Meeting Presentation System