Date & Time; Setting The Date And Time - AMX NMX-MM-1000 Instruction Manual

Date & Time
The Date & Time screen (FIG. 51) lists a set of options for setting the date and time for the Enzo Meeting Presentation
System. By default, the Enzo Meeting Presentation System uses the date and time provided by the network.
FIG. 51 Date & Time screen
The following table lists the options on the Date & Time screen:
Date & Time Options
Automatic Date & Time
Set Date
Set Time
Select Time Zone
Use 24-hour Format
Choose Date Format

Setting the Date and Time

By default, the Enzo Meeting Presentation System uses the network-provided date and time. You may want to verify that
the date and time are correct while setting up the device. Perform these steps to set the date and time on the Enzo
Meeting Presentation System:
1.
On the main screen, select Options.
2.
In the Select Option area, select Settings.
3.
On the Settings screen, select System Settings.
4.
In the System section, select Date & Time.
5.
Enter the security password in the text box that appears, and select OK. The default password is 1988.
6.
Check that the current date and time is correct on the device.
7.
Select Select time zone and select your time zone from the provided list.
Instruction Manual - NMX-MM-1000 Enzo Meeting Presentation System
This option lets you indicate whether you want the Enzo to automatically
retrieve the current date and time from the local network.
This option opens the calendar tool and lets you use it to set the current date.
After choosing the correct date, click Done. This option is only available if you
do not have Enzo set to automatically retrieve the date and time from the local
network.
This option opens the Set Time tool and lets you use it to set the current time.
After choosing the correct time, click Done. This option is only available if you
do not have Enzo set to automatically retrieve the date and time from the local
network.
This option opens the Select Time Zone menu and lets you use it to select your
time zone. The default setting is GMT.
This option lets you indicate whether you want Enzo to use a 12-hour or
24-hour clock. Checking the box indicates you want a 24-hour clock.
This option opens the Choose Date Format menu and lets you select the date
format from the provided list. When you select an option, it immediately takes
effect.
Enzo Configuration
41