Mounting With An Enzo Rack Mount Adapter; Mounting With The Surface Mount Brackets - AMX NMX-MM-1000 Instruction Manual

Mounting with an Enzo Rack Mount Adapter

The NMX-MM-RKA Enzo Rack Mount Adapter (FG3211-60) is another option for mounting the Enzo in a rack. The
rack mount adapter ships with four screws used for mounting the Enzo to the rack mount adapter and the rack mount
adapter to the rack. Perform these steps to mount the Enzo using a rack mount adapter.
1.
Use two of the provided screws to secure the Enzo to the rack mount adapter (see step 1 in FIG. 3).
2
FIG. 3 NMX-MM-RKA Enzo Rack Mount Adapter
2.
Use the two remaining screws to secure the rack mount adapter to the rack (see step 2 in FIG. 3).

Mounting with the Surface Mount Brackets

The Surface Mount Brackets are designed for mounting a single module (to a wall, on or under a desk, etc.) The brackets
may be attached to mount the top or the bottom flush with the mounting surface.
Insert the #4-40 3/16 inch pan head screws (provided) as shown in FIG. 4 and tighten. Brackets can either align flush
with the top or with the bottom.
FIG. 4 Insert screws and tighten
Instruction Manual - NMX-MM-1000 Enzo Meeting Presentation System
1
1
2
Overview
3