Ethernet - AMX NMX-MM-1000 Instruction Manual

Enzo Configuration

Ethernet

The Ethernet screen (FIG. 48) displays the network information for the Enzo. You can select any listed network option
and change it using the on-screen keyboard or keypad.
FIG. 48
Ethernet screen
The following table lists the options on the Ethernet screen:
Ethernet Options
DHCP/Static
IP Address
Subnet Mask
Gateway
Hostname
Domain
Primary DNS
Secondary DNS
MAC Address
38
This option opens the DHCP/Static menu and lets you select the type of IP
address for the Enzo. You can choose from DHCP or Static. When you select
an option, it immediately takes effect.
This option opens the IP Address text box and lets you enter the IP address of
the Enzo. This option is only available if you set a static IP address.
This option opens the Subnet Mask text box and lets you enter the subnet of
the Enzo. This option is only available if you set a static IP address.
This option opens the Gateway text box and lets you enter the gateway
address of the Enzo. This option is only available if you set a static IP address.
This option opens the Hostname text box and lets you enter the host name of
the Enzo.
This option opens the Domain text box and lets you enter the domain name of
the Enzo. This option is only available if you set a static IP address.
This option opens the Primary DNS text box and lets you enter the primary
DNS address of the Enzo. This option is only available if you set a static IP
address.
This option opens the Secondary DNS text box and lets you enter the
secondary DNS address of the Enzo. This option is only available if you set a
static IP address.
This option lets you view the MAC address of the Enzo. This option is
view-only.
Instruction Manual - NMX-MM-1000 Enzo Meeting Presentation System