Scope Command - AMX NMX-MM-1000 Instruction Manual

Appendix A - AMX Shell Commands

Scope Command

The scope command is provided as a default system command. You can also use the scope command to specify a scope
at runtime in which you want to work. If you are working in a specific scope, all commands executed via the shell will
have biased command resolution to the selected scope.
The following command displays the scope command usage in the shell session.
> scope --help [ENTER]
FIG. 72 Scope command help
You can use the scope command to switch scopes ().
> scope [ENTER]
FIG. 73 Scope command
64 Instruction Manual - NMX-MM-1000 Enzo Meeting Presentation System