Display; Setting The Display Resolution - AMX NMX-MM-1000 Instruction Manual

Display

The Display screen (FIG. 47) provides options to set the resolution, timeout length, and font size for the Enzo.
FIG. 47 Display screen
The following table lists the options on the Display screen:
Display Options
Resolution
Display Timeout
Font Size

Setting the Display Resolution

The display resolution on the Enzo Meeting Presentation System is set to Auto by default. You can set a definite
resolution of 1080p or 720p, if needed. Perform these steps to set the display resolution:
1.
On the main screen, select Options.
2.
From the Select Option area, select Settings.
3.
Select System Settings.
4.
In the Info section, select Display.
5.
Enter the security password in the text box that appears, and select OK. The default password is 1988.
6.
Select Resolution, and select the resolution you want from the list that appears. The new resolution takes effect
after rebooting the Enzo.
Instruction Manual - NMX-MM-1000 Enzo Meeting Presentation System
This option opens the Resolution menu and lets you set the display resolution
for the video display. You can choose from 720p, 1080p, or Auto. The default
setting is Auto.
This option opens the Display Timeout menu and lets you set the amount of
time before the video display goes into screen saver mode. You can choose
from a set number of timeout options from 5 seconds to 2 hours. When you
select an option, it immediately takes effect.
This option opens the Font Size menu and lets you choose a font size for all
text on the video display. You can choose from Small, Normal, Large, or Huge.
The default setting is Normal. When you select an option, it immediately takes
effect.
Enzo Configuration
37