Installation; Overview; Step 1: Connecting The Nmx-Mm-1000 To A Video Output; Step 2: Connecting A Keyboard And Mouse - AMX NMX-MM-1000 Instruction Manual

Installation

Overview

Installing the NMX-MM-1000 is a quick and simple process. Before connecting the NMX-MM-1000 to its peripheral
devices and powering the device, be sure to mount the device using the desired method. See the Mounting the
NMX-MM-1000 section on page 2 for more information.
The following section lists the components on the rear panel of the NMX-MM-1000.
Connect peripheral devices
FIG. 14 NMX-MM-1000 (rear panel)

Step 1: Connecting the NMX-MM-1000 to a Video Output

The NMX-MM-1000 uses standard HDMI cabling to connect to a video output. Use an HDMI cable to connect the
HDMI OUT port on the rear panel of the device to your display device.

Step 2: Connecting a Keyboard and Mouse

The front and rear panels of the NMX-MM-1000 each feature two Type-A USB ports for mouse and keyboard
functionality.
Note: In addition to a directly connected USB keyboard and mouse, the NMX-MM-1000 also supports using a 2.4 GHz
RF wireless keyboard and mouse using a wireless dongle. Bluetooth devices are NOT supported.
You can also use the ports for reading from a mass storage device, such as a USB hard drive or flash drive. (USB
external hard drives may require their own power sources. The maximum power allowed across all USB ports is 4W.)
Note: The USB ports support USB mass storage devices using a FAT format. USB mass storage devices using an NTFS
format may not work on these ports.
Note: You can connect only one USB mass storage device at a time. Once you connect a USB drive and Enzo mounts the
drive, you can access the files on it. If you do not receive a message stating the USB drive is mounted, Enzo did not
recognize the drive. A storage device's contents are not accessible if the device is connected while another storage device
occupies a USB port. If a first USB drive is connected, mounted, and unmounted, a second USB drive will still not be
recognized unless the first USB drive is removed from the Enzo device.
Instruction Manual - NMX-MM-1000 Enzo Meeting Presentation System
Cat5 cable from PoE injector to provide power
HDMI cable out
to video monitor
Installation
9