Device Info; Maintenance; Rebooting The Enzo - AMX NMX-MM-1000 Instruction Manual

Device Info

The Device Info screen (FIG. 43) lists information about the device such as its IP address and firmware version.
Additionally, you can find information about the Enzo's available memory and the connected NetLinx Master, if any. All
information in this area is view-only.
FIG. 43 Device Info screen

Maintenance

The Maintenance screen (FIG. 44) provides the option to reboot the device.
FIG. 44 Maintenance screen

Rebooting the Enzo

Perform the following steps to reboot the Enzo:
1.
On the main Enzo screen, select Options.
2.
From the Select Option menu, select Settings.
3.
Select System Settings.
4.
Select Maintenance.
5.
Select Reboot.
6.
Select OK on the verification screen.
Instruction Manual - NMX-MM-1000 Enzo Meeting Presentation System
Enzo Configuration
35