Warnings And Cautions - AMX NMX-MM-1000 Instruction Manual

Copyright Notice
AMX© 2013, all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of
AMX. Copyright protection claimed extends to AMX hardware and software and includes all forms and matters copyrightable
material and information now allowed by statutory or judicial law or herein after granted, including without limitation, material
generated from the software programs which are displayed on the screen such as icons, screen display looks, etc.
Reproduction or disassembly of embodied computer programs or algorithms is expressly prohibited.
No patent liability is assumed with respect to the use of information contained herein.
Liability Notice
While every precaution has been taken in the preparation of this publication, AMX assumes no responsibility for error or
omissions. No liability is assumed for damages resulting from the use of the information contained herein.
Further, this publication and features described herein are subject to change without notice.
Lithium Batteries Notice
Switzerland requires the following notice for products equipped with lithium batteries. This notice is not applicable for all AMX
equipment.
Upon shipment of the products to Switzerland, the requirements of the most up-to-date Swiss Ordinance Annex 2.15 of SR
814.81 will be met including provision of the necessary markings, documents, and annual reports relative to the disposal of the
batteries to the Swiss Authorities.
Trademark Notices
AMX®, Enova®, AutoPatch®, NetLinx®, DXLink™, SmartScale®, and InstaGate Pro® are trademarks of AMX.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
3M™, Desco®, Richmond Technology®, and Plastic Systems® are registered trademarks.
Ethernet® is a registered trademark of the Xerox Corporation.
ENERGY STARR is a registered trademark of the U.S. Department of Energy and the U.S. Environmental Protection Agency
Other products mentioned herein may be the trademarks of their respective owners.
This manual uses the following conventions and icons to draw attention to actions or conditions that could potentially cause
problems with equipment or lead to personal risk:
ESD Warning: The icon to the left indicates text regarding potential danger associated with the discharge
Warning:
Caution:
To avoid ESD (Electrostatic Discharge) damage to sensitive components, make sure you are properly grounded before touching
any internal materials.
When working with any equipment manufactured with electronic devices, proper ESD grounding procedures must be followed
to make sure people, products, and tools are as free of static charges as possible. Grounding straps, conductive smocks, and
conductive work mats are specifically designed for this purpose.
Anyone performing field maintenance on AMX DXLink equipment should use an appropriate ESD field service kit complete with
at least a dissipative work mat with a ground cord and a UL listed adjustable wrist strap with another ground cord. These items
should not be manufactured locally, since they are generally composed of highly resistive conductive materials to safely drain
static charges, without increasing an electrocution risk in the event of an accident. ESD protective equipment can be obtained
from 3M™, Desco®, Richmond Technology®, Plastic Systems®, and other such vendors.
Notices

Warnings and Cautions

of static electricity from an outside source (such as human hands) into an integrated circuit,
often resulting in damage to the circuit.
The icon to the left indicates text that warns readers against actions or conditions that
could cause potential injury to themselves.
The icon to the left indicates text that cautions readers against actions that could cause
potential injury to the product or the possibility of serious inconvenience.
ESD Warning