Overview; Specifications - AMX NMX-MM-1000 Instruction Manual

Enzo meeting presentation system
Hide thumbs Also See for NMX-MM-1000:
Table of Contents

Advertisement

Overview

The NMX-MM-1000 Enzo Meeting Presentation System (FG3211-01) allows you to easily access content and
documents stored on USB, on the web, or in the cloud. Content is accessible from web pages, USB drives, or Dropbox
The Enzo Media Presentation System is a power-efficient device with no moving parts that is powered using Power over
Ethernet (PoE).
FIG. 1
NMX-MM-1000

Specifications

The following table lists the specifications for the NMX-MM-1000:
NMX-MM-1000 Specifications
Front Panel Components
POWER:
USB:
Button:
Rear Panel Components
USB:
LAN 10/100:
HDMI OUT:
AUDIO OUT:
RS-232:
General
Power:
Memory:
Internal Storage:
Instruction Manual - NMX-MM-1000 Enzo Meeting Presentation System
1 LED noting the power and alarm state. The LED appears in green (active and
no alarm) or red (one or more alarms).
2 Type-A 2.0 USB connectors for connecting peripheral devices, such as a
USB keyboard or mouse, or a mass storage device, such as a USB hard drive
or flash drive.Note: You can only connect one USB drive at a time to the USB
ports.Note: The total available power across all USB ports is limited to XX W.
Any USB peripheral that causes the total USB power consumption to exceed
this amount will need to be powered with its own supply.
1 pushbutton to enter the device into sleep mode or access the system settings
on the video output.
2 Type-A 2.0 USB connectors for connecting peripheral devices, such as a
USB keyboard or mouse, or a mass storage device, such as a USB hard drive
or flash drive.Note: You can only connect one USB drive at a time to the USB
ports.Note: The total available power across all USB ports is limited to XX W.
Any USB peripheral that causes the total USB power consumption to exceed
this amount will need to be powered with its own supply.
2 10/100 Base T LAN ports for network connection via Cat5 cable. Enzo
obtains its power from a Power-over-Ethernet (PoE) source connected to Port
1.
1 HDMI connector for video output
1 3.5mm mini-phono connector for audio output
1 9-pin DB9 connector for control of displays using RS-232 (available in a
future firmware release)
• Power over Ethernet (PoE), 802.3af
• Maximum Power Consumption: 13W
2 GB RAM
16 GB Flash memory (12 GB usable)
Overview
®
.
1

Advertisement

Table of Contents
loading

Table of Contents