Reset And Update; Diagnostics - AMX NMX-MM-1000 Administrator's Manual

Reset and Update

The Reset and Update screen (FIG. 68) lists a set of options to reset the Enzo Meeting Presentation System to its factory settings or
update the firmware.
NOTE:
Reset Settings will boot any users off of the WebApp.
Reset and Update Screen
FIG. 68
The following table lists the options on the Reset and Update screen:
Reset and Update Options
Device Reset
Factory Data Reset
Reset Settings
Update Firmware
Update Manager
Web Services
Firmware manager

Diagnostics

The Diagnostics screen (FIG. 69) displays the temperature of the Enzo Meeting Presentation System and provides an option to view
a log file. Also featured is the option to enable or disable Secure Shell (SSH) access. If SSH is disabled, the Enzo cannot be accessed
through AMX Shell. See the Enzo Programmers Guide for more information.
Diagnostics Screen
FIG. 69
The following table lists the options on the Diagnostics screen:
Diagnostics Options
Temperature
Logs
SSH
Administrators Guide - NMX-MM-1000 Enzo Meeting Presentation System
This option resets the Enzo's data to its factory settings.
This option resets the Enzo's settings to its factory default settings. Click Yes to confirm to
reset the settings.
NOTE: Reset Settings will boot any users off of the WebApp.
This option updates the firmware file for the Enzo. If necessary, it can be reverted to a
previous firmware version or to the factory version. See the Download the ZIP f ile and unzip
the contents to a known location. section on page 69 for instructions on upgrading firmware.
Click this to enable Enzo to connect to the Update manager server for simple firmware
updates.
Use this option to update the Enzo firmware from USB, Revert to previous load, Revert to
Factory Firmware load, or load the current Web Server version.
This option displays the current temperature of the Enzo device. This option is view-only.
This option opens a log file to view system and application diagnostics log messages.
This option toggles whether SSH is enabled. If SSH is disabled, Enzo cannot be accessed via
AMX Shell. This option is enabled by default.
Enzo System Settings
37