Connections; Ethernet - AMX NMX-MM-1000 Administrator's Manual

Connections

The Connections heading contains subheadings that enable users to set Enzo external interface settings. Tasks covered under
Connections are:
Ethernet on page 29

NetLinx on page 30

Email on page 31

Browser on page 31


Ethernet

The Ethernet screen (FIG. 55) displays the network information for the Enzo. Select any listed network option and change it using
the on-screen keyboard or keypad.
Ethernet Screen
FIG. 55
The following table lists the options on the Ethernet screen:
Ethernet Options
DHCP/Static
IP Address
Subnet Mask
Gateway
Hostname
Domain
Primary DNS
Secondary DNS
MAC Address
Administrators Guide - NMX-MM-1000 Enzo Meeting Presentation System
This option opens the DHCP/Static menu to select the type of IP address for the Enzo. Choose
from DHCP or Static which will immediately take effect.
This option opens the IP Address text box to enter the IP address of the Enzo. This option is only
available if a static IP address is set.
This option opens the Subnet Mask text box to enter the subnet of the Enzo. This option is only
available if a static IP address is set.
This option opens the Gateway text box to enter the gateway address of the Enzo. This option is
only available if a static IP address is set.
This option opens the Hostname text box to enter the host name of the Enzo.
This option opens the Domain text box to enter the domain name of the Enzo. This option is only
available if a static IP address is set.
This option opens the Primary DNS text box to enter the primary DNS address of the Enzo. This
option is only available if a static IP address is set.
This option opens the Secondary DNS text box to enter the secondary DNS address of the Enzo.
This option is only available if a static IP address is set.
This option displays the MAC address of the Enzo. This option is view-only.
Enzo System Settings
29